diff options
Diffstat (limited to 'vim/doc/Align.txt')
| -rw-r--r-- | vim/doc/Align.txt | 1469 |
1 files changed, 0 insertions, 1469 deletions
diff --git a/vim/doc/Align.txt b/vim/doc/Align.txt deleted file mode 100644 index c447372..0000000 --- a/vim/doc/Align.txt +++ /dev/null @@ -1,1469 +0,0 @@ -*align.txt* The Alignment Tool Mar 04, 2009 - -Author: Charles E. Campbell, Jr. <NdrOchip@ScampbellPfamily.AbizM> - (remove NOSPAM from Campbell's email first) -Copyright: (c) 2004-2008 by Charles E. Campbell, Jr. *Align-copyright* - The VIM LICENSE applies to Align.vim, AlignMaps.vim, and Align.txt - (see |copyright|) except use "Align and AlignMaps" instead of "Vim" - NO WARRANTY, EXPRESS OR IMPLIED. USE AT-YOUR-OWN-RISK. - -============================================================================== -1. Contents *align* *align-contents* {{{1 - - 1. Contents.................: |align-contents| - 2. Alignment Manual.........: |align-manual| - 3. Alignment Usage..........: |align-usage| - Alignment Concepts.......: |align-concepts| - Alignment Commands.......: |align-commands| - Alignment Control........: |align-control| - Separators.............: |alignctrl-separators| - Initial Whitespace.....: |alignctrl-w| |alignctrl-W| |alignctrl-I| - Justification..........: |alignctrl-l| |alignctrl-r| |alignctrl-c| - Justification Control..: |alignctrl--| |alignctrl-+| |alignctrl-:| - Cyclic/Sequential......: |alignctrl-=| |alignctrl-C| - Separator Justification: |alignctrl-<| |alignctrl->| |alignctrl-|| - Line (de)Selection.....: |alignctrl-g| |alignctrl-v| - Temporary Settings.....: |alignctrl-m| - Padding................: |alignctrl-p| |alignctrl-P| - Current Options........: |alignctrl-settings| |alignctrl-| - Alignment................: |align-align| - 4. Alignment Maps...........: |align-maps| - \a,....................: |alignmap-a,| - \a?....................: |alignmap-a?| - \a<....................: |alignmap-a<| - \abox..................: |alignmap-abox| - \acom..................: |alignmap-acom| - \anum..................: |alignmap-anum| - \ascom.................: |alignmap-ascom| - \adec..................: |alignmap-adec| - \adef..................: |alignmap-adef| - \afnc..................: |alignmap-afnc| - \adcom.................: |alignmap-adcom| - \aocom.................: |alignmap-aocom| - \tsp...................: |alignmap-tsp| - \tsq...................: |alignmap-tsq| - \tt....................: |alignmap-tt| - \t=....................: |alignmap-t=| - \T=....................: |alignmap-T=| - \Htd...................: |alignmap-Htd| - 5. Alignment Tool History...: |align-history| - -============================================================================== -2. Align Manual *alignman* *alignmanual* *align-manual* {{{1 - - Align comes as a vimball; simply typing > - vim Align.vba.gz - :so % -< should put its components where they belong. The components are: > - .vim/plugin/AlignPlugin.vim - .vim/plugin/AlignMapsPlugin.vim - .vim/plugin/cecutil.vim - .vim/autoload/Align.vim - .vim/autoload/AlignMaps.vim - .vim/doc/Align.txt -< To see a user's guide, see |align-userguide| - To see examples, see |alignctrl| and |alignmaps| -> -/=============+=========+=====================================================\ -|| \ Default/ || -|| Commands \ Value/ Explanation || -|| | | || -++==============+====+=======================================================++ -|| AlignCtrl | | =Clrc-+:pPIWw [..list-of-separator-patterns..] || -|| | +-------------------------------------------------------+| -|| | | may be called as a command or as a function: || -|| | | :AlignCtrl =lp0P0W & \\ || -|| | | :call Align#AlignCtrl('=lp0P0W','&','\\') || -|| | | || -|| | +-------------------------------------------------------++ -|| 1st arg | = | = all separator patterns are equivalent and are || -|| | | simultaneously active. Patterns are |regexp|. || -|| | | C cycle through separator patterns. Patterns are || -|| | | |regexp| and are active sequentially. || -|| | | || -|| | < | < left justify separator Separators are justified, || -|| | | > right justify separator too. Separator styles || -|| | | | center separator are cyclic. || -|| | | || -|| | l | l left justify Justification styles are always || -|| | | r right justify cyclic (ie. lrc would mean left j., || -|| | | c center then right j., then center, repeat. || -|| | | - skip this separator || -|| | | + re-use last justification method || -|| | | : treat rest of text as a field || -|| | | || -|| | p1 | p### pad separator on left by # blanks || -|| | P1 | P### pad separator on right by # blanks || -|| | | || -|| | I | I preserve and apply first line's leading white || -|| | | space to all lines || -|| | | W preserve leading white space on every line, even || -|| | | if it varies from line to line || -|| | | w don't preserve leading white space || -|| | | || -|| | | g second argument is a selection pattern -- only || -|| | | align on lines that have a match (inspired by || -|| | | :g/selection pattern/command) || -|| | | v second argument is a selection pattern -- only || -|| | | align on lines that _don't_ have a match (inspired || -|| | | by :v/selection pattern/command) || -|| | | || -|| | | m Map support: AlignCtrl will immediately do an || -|| | | AlignPush() and the next call to Align() will do || -|| | | an AlignPop at the end. This feature allows maps || -|| | | to preserve user settings. || -|| | | || -|| | | default || -|| | | AlignCtrl default || -|| | | will clear the AlignCtrl || -|| | | stack & set the default: AlignCtrl "Ilp1P1=" '=' || -|| | | || -|| +----+-------------------------------------------------------+| -|| More args | More arguments are interpreted as describing separators || -|| +------------------------------------------------------------+| -|| No args | AlignCtrl will display its current settings || -||==============+============================================================+| -||[range]Align | [..list-of-separators..] || -||[range]Align! | [AlignCtrl settings] [..list-of-separators..] || -|| +------------------------------------------------------------+| -|| | Aligns text over the given range. The range may be || -|| | selected via visual mode (v, V, or ctrl-v) or via || -|| | the command line. The Align operation may be invoked || -|| | as a command or as a function; as a function, the first || -|| | argument is 0=separators only, 1=AlignCtrl option string || -|| | followed by a list of separators. || -|| | :[range]Align || -|| | :[range]Align [list of separators] || -|| | :[range]call Align#Align(0) || -|| | :[range]call Align#Align(0,"list","of","separators",...) || -\=============================================================================/ - -============================================================================== -3. Alignment Usage *alignusage* *align-usage* *align-userguide* {{{1 - - -ALIGNMENT CONCEPTS *align-concept* *align-concepts* {{{2 - - The typical text to be aligned is considered to be: - - * composed of two or more fields - * separated by one or more separator pattern(s): - * two or more lines -> - ws field ws separator ws field ws separator ... - ws field ws separator ws field ws separator ... -< - where "ws" stands for "white space" such as blanks and/or tabs, - and "fields" are arbitrary text. For example, consider > - - x= y= z= 3; - xx= yy= zz= 4; - zzz= yyy= zzz= 5; - a= b= c= 3; -< - Assume that it is desired to line up all the "=" signs; these, - then, are the separators. The fields are composed of all the - alphameric text. Assuming they lie on lines 1-4, one may align - those "=" signs with: > - :AlignCtrl l - :1,4Align = -< The result is: > - x = y = z = 3; - xx = yy = zz = 4; - zzz = yyy = zzz = 5; - a = b = c = 3; - -< Note how each "=" sign is surrounded by a single space; the - default padding is p1P1 (p1 means one space before the separator, - and P1 means one space after it). If you wish to change the - padding, say to no padding, use (see |alignctrl-p|) > - :AlignCtrl lp0P0 - -< Next, note how each field is left justified; that's what the "l" - (a small letter "ell") does. If right-justification of the fields - had been desired, an "r" could've been used: > - :AlignCtrl r -< yielding > - x = y = z = 3; - xx = yy = zz = 4; - zzz = yyy = zzz = 5; - a = b = c = 3; -< There are many more options available for field justification: see - |alignctrl-c| and |alignctrl--|. - - Separators, although commonly only one character long, are actually - specified by regular expressions (see |regexp|), and one may left - justify, right justify, or center them, too (see |alignctrl-<|). - - Assume that for some reason a left-right-left-right-... justification - sequence was wished. This wish is simply achieved with > - :AlignCtrl lr - :1,4Align = -< because the justification commands are considered to be "cylic"; ie. - lr is the same as lrlrlrlrlrlrlr... - - There's a lot more discussed under |alignctrl|; hopefully the examples - there will help, too. - - -ALIGNMENT COMMANDS *align-command* *align-commands* {{{2 - - The <Align.vim> script includes two primary commands and two - minor commands: - - AlignCtrl : this command/function sets up alignment options - which persist until changed for later Align calls. - It controls such things as: how to specify field - separators, initial white space, padding about - separators, left/right/center justification, etc. > - ex. AlignCtrl wp0P1 - Interpretation: during subsequent alignment - operations, preserve each line's initial - whitespace. Use no padding before separators - but provide one padding space after separators. -< - Align : this command/function operates on the range given it to - align text based on one or more separator patterns. The - patterns may be provided via AlignCtrl or via Align - itself. > - - ex. :%Align , - Interpretation: align all commas over the entire - file. -< The :Align! format permits alignment control commands - to precede the alignment patterns. > - ex. :%Align! p2P2 = -< This will align all "=" in the file with two padding - spaces on both sides of each "=" sign. - - NOTE ON USING PATTERNS WITH ALIGN:~ - Align and AlignCtrl use |<q-args>| to obtain their - input patterns and they use an internal function to - split arguments at whitespace unless inside "..."s. - One may escape characters inside a double-quote string - by preceding such characters with a backslash. - - AlignPush : this command/function pushes the current AlignCtrl - state onto an internal stack. > - ex. :AlignPush - Interpretation: save the current AlignCtrl - settings, whatever they may be. They'll - also remain as the current settings until - AlignCtrl is used to change them. -< - AlignPop : this command/function pops the current AlignCtrl - state from an internal stack. > - ex. :AlignPop - Interpretation: presumably AlignPush was - used (at least once) previously; this command - restores the AlignCtrl settings when AlignPush - was last used. -< Also see |alignctrl-m| for a way to automatically do - an AlignPop after an Align (primarily this is for maps). - -ALIGNMENT OPTIONS *align-option* *align-options* {{{2 - *align-utf8* *align-utf* *align-codepoint* *align-strlen* *align-multibyte* - - For those of you who are using 2-byte (or more) characters such as are - available with utf-8, Align now provides a special option which you - may choose based upon your needs: - - Use Built-in strlen() ~ -> - let g:Align_xstrlen= 0 - -< This is the fastest method, but it doesn't handle multibyte characters - well. It is the default for: - - enc=latin1 - vim compiled without multi-byte support - $LANG is en_US.UTF-8 (assuming USA english) - - Number of codepoints (Latin a + combining circumflex is two codepoints)~ -> - let g:Align_xstrlen= 1 (default) -< - Number of spacing codepoints (Latin a + combining circumflex is one~ - spacing codepoint; a hard tab is one; wide and narrow CJK are one~ - each; etc.)~ -> - let g:Align_xstrlen= 2 -< - Virtual length (counting, for instance, tabs as anything between 1 and~ - 'tabstop', wide CJK as 2 rather than 1, Arabic alif as zero when~ - immediately preceded by lam, one otherwise, etc.)~ -> - let g:Align_xstrlen= 3 -< - By putting one of these settings into your <.vimrc>, Align will use an - internal (interpreted) function to determine a string's length instead - of the Vim's built-in |strlen()| function. Since the function is - interpreted, Align will run a bit slower but will handle such strings - correctly. The last setting (g:Align_xstrlen= 3) probably will run - the slowest but be the most accurate. (thanks to Tony Mechelynck for - these) - - -ALIGNMENT CONTROL *alignctrl* *align-control* {{{2 - - This command doesn't do the alignment operation itself; instead, it - controls subsequent alignment operation(s). - - The first argument to AlignCtrl is a string which may contain one or - more alignment control settings. Most of the settings are specified - by single letters; the exceptions are the p# and P# commands which - interpret a digit following the p or P as specifying padding about the - separator. - - The typical text line is considered to be composed of two or more - fields separated by one or more separator pattern(s): > - - ws field ws separator ws field ws separator ... -< - where "ws" stands for "white space" such as blanks and/or tabs. - - - SEPARATORS *alignctrl-separators* {{{3 - - As a result, separators may not have white space (tabs or blanks) on - their outsides (ie. ": :" is fine as a separator, but " :: " is - not). Usually such separators are not needed, although a map has been - provided which works around this limitation and aligns on whitespace - (see |alignmap-tsp|). - - However, if you really need to have separators with leading or - trailing whitespace, consider handling them by performing a substitute - first (ie. s/ :: /@/g), do the alignment on the temporary pattern - (ie. @), and then perform a substitute to revert the separators back - to their desired condition (ie. s/@/ :: /g). - - The Align#Align() function will first convert tabs over the region into - spaces and then apply alignment control. Except for initial white - space, white space surrounding the fields is ignored. One has three - options just for handling initial white space: - - - --- *alignctrl-w* - wWI INITIAL WHITE SPACE *alignctrl-W* {{{3 - --- *alignctrl-I* - w : ignore all selected lines' initial white space - W : retain all selected lines' initial white space - I : retain only the first line's initial white space and - re-use it for subsequent lines - - Example: Leading white space options: > - +---------------+-------------------+-----------------+ - |AlignCtrl w= :=| AlignCtrl W= := | AlignCtrl I= := | - +------------------+---------------+-------------------+-----------------+ - | Original | w option | W option | I option | - +------------------+---------------+-------------------+-----------------+ - | a := baaa |a := baaa | a : = baaa | a := baaa | - | caaaa := deeee |caaaa := deeee | caaaa : = deeee| caaaa := deeee| - | ee := f |ee := f | ee : = f | ee := f | - +------------------+---------------+-------------------+-----------------+ -< - The original has at least one leading white space on every line. - Using Align with w eliminated each line's leading white space. - Using Align with W preserved each line's leading white space. - Using Align with I applied the first line's leading white space - (three spaces) to each line. - - - ------ *alignctrl-l* - lrc-+: FIELD JUSTIFICATION *alignctrl-r* {{{3 - ------ *alignctrl-c* - - With "lrc", the fields will be left-justified, right-justified, or - centered as indicated by the justification specifiers (lrc). The - "lrc" options are re-used by cycling through them as needed: - - l means llllll.... - r means rrrrrr.... - lr means lrlrlr.... - llr means llrllr.... - - Example: Justification options: Align = > - +------------+-------------------+-------------------+-------------------+ - | Original | AlignCtrl l | AlignCtrl r | AlignCtrl lr | - +------------+-------------------+-------------------+-------------------+ - | a=bb=ccc=1 |a = bb = ccc = 1| a = bb = ccc = 1|a = bb = ccc = 1| - | ccc=a=bb=2 |ccc = a = bb = 2|ccc = a = bb = 2|ccc = a = bb = 2| - | dd=eee=f=3 |dd = eee = f = 3| dd = eee = f = 3|dd = eee = f = 3| - +------------+-------------------+-------------------+-------------------+ - | Alignment |l l l l| r r r r|l r l r| - +------------+-------------------+-------------------+-------------------+ -< - AlignCtrl l : The = separator is repeatedly re-used, as the - cycle only consists of one character (the "l"). - Every time left-justification is used for fields. - AlignCtrl r : The = separator is repeatedly re-used, as the - cycle only consists of one character (the "l"). - Every time right-justification is used for fields - AlignCtrl lr: Again, the "=" separator is repeatedly re-used, - but the fields are justified alternately between - left and right. - - Even more separator control is available. With "-+:": - - - : skip treating the separator as a separator. *alignctrl--* - + : repeat use of the last "lrc" justification *alignctrl-+* - : : treat the rest of the line as a single field *alignctrl-:* - - Example: More justification options: Align = > - +------------+---------------+--------------------+---------------+ - | Original | AlignCtrl -l | AlignCtrl rl+ | AlignCtrl l: | - +------------+---------------+--------------------+---------------+ - | a=bb=ccc=1 |a=bb = ccc=1 | a = bb = ccc = 1 |a = bb=ccc=1 | - | ccc=a=bb=2 |ccc=a = bb=2 |ccc = a = bb = 2 |ccc = a=bb=2 | - | dd=eee=f=3 |dd=eee = f=3 | dd = eee = f = 3 |dd = eee=f=3 | - +------------+---------------+--------------------+---------------+ - | Alignment |l l | r l l l |l l | - +------------+---------------+--------------------+---------------+ -< - In the first example in "More justification options": - - The first "=" separator is skipped by the "-" specification, - and so "a=bb", "ccc=a", and "dd=eee" are considered as single fields. - - The next "=" separator has its (left side) field left-justified. - Due to the cyclic nature of separator patterns, the "-l" - specification is equivalent to "-l-l-l ...". - - Hence the next specification is a "skip", so "ccc=1", etc are fields. - - In the second example in "More justification options": - - The first field is right-justified, the second field is left - justified, and all remaining fields repeat the last justification - command (ie. they are left justified, too). - - Hence rl+ is equivalent to rlllllllll ... - (whereas plain rl is equivalent to rlrlrlrlrl ... ). - - In the third example in "More justification options": - - The text following the first separator is treated as a single field. - - Thus using the - and : operators one can apply justification to a - single separator. - - ex. 1st separator only: AlignCtrl l: - 2nd separator only: AlignCtrl -l: - 3rd separator only: AlignCtrl --l: - etc. - - - --- *alignctrl-=* - =C CYCLIC VS ALL-ACTIVE SEPARATORS *alignctrl-C* {{{3 - --- - - The separators themselves may be considered as equivalent and - simultaneously active ("=") or sequentially cycled through ("C"). - Separators are regular expressions (|regexp|) and are specified as the - second, third, etc arguments. When the separator patterns are - equivalent and simultaneously active, there will be one pattern - constructed: > - - AlignCtrl ... pat1 pat2 pat3 - \(pat1\|pat2\|pat3\) -< - Each separator pattern is thus equivalent and simultaneously active. - The cyclic separator AlignCtrl option stores a list of patterns, only - one of which is active for each field at a time. - - Example: Equivalent/Simultaneously-Active vs Cyclic Separators > - +-------------+------------------+---------------------+----------------------+ - | Original | AlignCtrl = = + -| AlignCtrl = = | AlignCtrl C = + - | - +-------------+------------------+---------------------+----------------------+ - |a = b + c - d|a = b + c - d |a = b + c - d |a = b + c - d | - |x = y = z + 2|x = y = z + 2 |x = y = z + 2|x = y = z + 2 | - |w = s - t = 0|w = s - t = 0 |w = s - t = 0 |w = s - t = 0 | - +-------------+------------------+---------------------+----------------------+ -< - The original is initially aligned with all operators (=+-) being - considered as equivalent and simultaneously active field separators. - Thus the "AlignCtrl = = + -" example shows no change. - - The second example only accepts the '=' as a field separator; - consequently "b + c - d" is now a single field. - - The third example illustrates cyclic field separators and is analyzed - in the following illustration: > - - field1 separator field2 separator field3 separator field4 - a = b + c - d - x = y = z + 2 - w = s - t = 0 -< - The word "cyclic" is used because the patterns form a cycle of use; in - the above case, its = + - = + - = + - = + -... - - Example: Cyclic separators > - Label : this is some text discussing ":"s | ex. abc:def:ghi - Label : this is some text with a ":" in it | ex. abc:def -< - apply AlignCtrl lWC : | | - (select lines)Align > - Label : this is some text discussing ":"s | ex. abc:def:ghi - Label : this is some text with a ":" in it | ex. abcd:efg -< - In the current example, - : is the first separator So the first ":"s are aligned - | is the second separator but subsequent ":"s are not. - | is the third separator The "|"s are aligned, too. - : is the fourth separator Since there aren't two bars, - | is the fifth separator the subsequent potential cycles - | is the sixth separator don't appear. - ... - - In this case it would probably have been a better idea to have used > - AlignCtrl WCl: : | -< as that alignment control would guarantee that no more cycling - would be used after the vertical bar. - - Example: Cyclic separators - - Original: > - a| b&c | (d|e) & f-g-h - aa| bb&cc | (dd|ee) & ff-gg-hh - aaa| bbb&ccc | (ddd|eee) & fff-ggg-hhh -< - AlignCtrl C | | & - > - a | b&c | (d|e) & f - g-h - aa | bb&cc | (dd|ee) & ff - gg-hh - aaa | bbb&ccc | (ddd|eee) & fff - ggg-hhh -< - In this example, - the first and second separators are "|", - the third separator is "&", and - the fourth separator is "-", - - (cycling) - the fifth and sixth separators are "|", - the seventh separator is "&", and - the eighth separator is "-", etc. - - Thus the first "&"s are (not yet) separators, and hence are treated as - part of the field. Ignoring white space for the moment, the AlignCtrl - shown here means that Align will work with > - - field | field | field & field - field | field | field & field - ... -< - - --- *alignctrl-<* - <>| SEPARATOR JUSTIFICATION *alignctrl->* {{{3 - --- *alignctrl-|* - - Separators may be of differing lengths as shown in the example below. - Hence they too may be justified left, right, or centered. - Furthermore, separator justification specifications are cyclic: - - < means <<<<<... justify separator(s) to the left - > means >>>>>... justify separator(s) to the right - | means |||||... center separator(s) - - Example: Separator Justification: Align -\+ > - +-----------------+ - | Original | - +-----------------+ - | a - bbb - c | - | aa -- bb -- ccc | - | aaa --- b --- cc| - +---------------------+-+-----------------+-+---------------------+ - | AlignCtrl < | AlignCtrl > | AlignCtrl | | - +---------------------+---------------------+---------------------+ - | a - bbb - c | a - bbb - c | a - bbb - c | - | aa -- bb -- ccc | aa -- bb -- ccc | aa -- bb -- ccc | - | aaa --- b --- cc | aaa --- b --- cc | aaa --- b --- cc | - +---------------------+---------------------+---------------------+ -< - - --- *alignctrl-g* - gv SELECTIVE APPLICATION *alignctrl-v* {{{3 - --- - - - These two options provide a way to select (g) or to deselect (v) lines - based on a pattern. Ideally :g/pat/Align would work; unfortunately - it results in Align#Align() being called on each line satisfying the - pattern separately. > - - AlignCtrl g pattern -< - Align will only consider those lines which have the given pattern. > - - AlignCtrl v pattern -< - Align will only consider those lines without the given pattern. As an - example of use, consider the following example: > - - :AlignCtrl v ^\s*/\* - Original :Align = :Align = - +----------------+------------------+----------------+ - |one= 2; |one = 2; |one = 2; | - |three= 4; |three = 4; |three = 4; | - |/* skip=this */ |/* skip = this */ |/* skip=this */ | - |five= 6; |five = 6; |five = 6; | - +----------------+------------------+----------------+ -< - The first "Align =" aligned with all "="s, including that one in the - "skip=this" comment. - - The second "Align =" had a AlignCtrl v-pattern which caused it to skip - (ignore) the "skip=this" line when aligning. - - To remove AlignCtrl's g and v patterns, use (as appropriate) > - - AlignCtrl g - AlignCtrl v -< - To see what g/v patterns are currently active, just use the reporting - capability of an unadorned call to AlignCtrl: > - - AlignCtrl -< - - --- - m MAP SUPPORT *alignctrl-m* {{{3 - --- - - This option primarily supports the development of maps. The - Align#AlignCtrl() call will first do an Align#AlignPush() (ie. retain - current alignment control settings). The next Align#Align() will, in - addition to its alignment job, finish up with an Align#AlignPop(). - Thus the Align#AlignCtrl settings that follow the "m" are only - temporarily in effect for just the next Align#Align(). - - - --- - p### *alignctrl-p* - P### PADDING *alignctrl-P* {{{3 - --- - - These two options control pre-padding and post-padding with blanks - about the separator. One may pad separators with zero to nine spaces; - the padding number(s) is/are treated as a cyclic parameter. Thus one - may specify padding separately for each field or re-use a padding - pattern. > - - Example: AlignCtrl p102P0 - +---------+----------------------------------+ - | Original| a=b=c=d=e=f=g=h=1 | - | Align = | a =b=c =d =e=f =g =h=1 | - +---------+----------------------------------+ - | prepad | 1 0 2 1 0 2 1 0 | - +---------+----------------------------------+ -< - This example will cause Align to: - - pre-pad the first "=" with a single blank, - pre-pad the second "=" with no blanks, - pre-pad the third "=" with two blanks, - pre-pad the fourth "=" with a single blank, - pre-pad the fifth "=" with no blanks, - pre-pad the sixth "=" with two blanks, - etc. - - --------------- *alignctrl-settings* - No option given DISPLAY STATUS *alignctrl-* {{{3 - --------------- *alignctrl-no-option* - - AlignCtrl, when called with no arguments, will display the current - alignment control settings. A typical display is shown below: > - - AlignCtrl<=> qty=1 AlignStyle<l> Padding<1|1> - Pat1<\(=\)> -< - Interpreting, this means that the separator patterns are all - equivalent; in this case, there's only one (qty=1). Fields will be - padded on the right with spaces (left justification), and separators - will be padded on each side with a single space. - - To change one of these items, see: - - AlignCtrl......|alignctrl| - qty............|align-concept| - AlignStyle.....|alignctrl--| |alignctrl-+| |alignctrl-:||alignctrl-c| - Padding........|alignctrl-p| |alignctrl-P| - - One may get a string which can be fed back into AlignCtrl: > - - :let alignctrl= Align#AlignCtrl() -< - This form will put a string describing the current AlignCtrl options, - except for the "g" and "v" patterns, into a variable. The - Align#AlignCtrl() function will still echo its settings, however. One - can feed any non-supported "option" to AlignCtrl() to prevent this, - however: > - - :let alignctrl= Align#AlignCtrl("d") -< - -ALIGNMENT *align-align* {{{2 - - Once the alignment control has been determined, the user specifies a - range of lines for the Align command/function to do its thing. - Alignment is often done on a line-range basis, but one may also - restrict alignment to a visual block using ctrl-v. For any visual - mode, one types the colon (:) and then "Align". One may, of course, - specify a range of lines: > - - :[range]Align [list-of-separators] -< - where the |:range| is the usual Vim-powered set of possibilities; the - list of separators is the same as the AlignCtrl capability. There is - only one list of separators, but either AlignCtrl or Align can be used - to specify that list. - - An alternative form of the Align command can handle both alignment - control and the separator list: > - - :[range]Align! [alignment-control-string] [list-of-separators] -< - The alignment control string will be applied only for this particular - application of Align (it uses |alignctrl-m|). The "g pattern" and - "v pattern" alignment controls (see |alignctrl-g| and |alignctrl-v|) - are also available via this form of the Align command. - - Align makes two passes over the text to be aligned. The first pass - determines how many fields there are and determines the maximum sizes - of each field; these sizes are then stored in a vector. The second - pass pads the field (left/right/centered as specified) to bring its - length up to the maximum size of the field. Then the separator and - its AlignCtrl-specified padding is appended. - - Pseudo-Code:~ - During pass 1 - | For all fields in the current line - || Determine current separator - || Examine field specified by current separator - || Determine length of field and save if largest thus far - Initialize newline based on initial whitespace option (wWI) - During pass 2 - | For all fields in current line - || Determine current separator - || Extract field specified by current separator - || Prepend/append padding as specified by AlignCtrl - || (right/left/center)-justify to fit field into max-size field - || Append separator with AlignCtrl-specified separator padding - || Delete current line, install newly aligned line - - The g and v AlignCtrl patterns cause the passes not to consider lines - for alignment, either by requiring that the g-pattern be present or - that the v-pattern not be present. - - The whitespace on either side of a separator is ignored. - - -============================================================================== -4. Alignment Maps *alignmaps* *align-maps* {{{1 - - There are a number of maps using Align#AlignCtrl() and Align#Align() - in the <AlignMapsPlugin.vim> file. This file may also be put into the - plugins subdirectory. Since AlignCtrl and Align supercede textab and - its <ttalign.vim> file, the maps either have a leading "t" (for - "textab") or the more complicated ones an "a" (for "alignment") for - backwards compatibility. - - The maps are shown below with a leading backslash (\). Actually, the - <Leader> construct is used (see |mapleader|), so the maps' leading - kick-off character is easily customized. - - Furthermore, all AlignMapsPlugin.vim maps use the <Plug> construct (see - |<Plug>|and |usr_41.txt|). Hence, if one wishes to override the - mapping entirely, one may do that, too. As an example: > - map <Leader>ACOM <Plug>AM_acom -< would have \ACOM do what \acom previously did (assuming that the - mapleader has been left at its default value of a backslash). - - \a, : useful for breaking up comma-separated - declarations prior to \adec |alignmap-a,| - \a( : aligns ( and , (useful for prototypes) *alignmap-a(* - \a? : aligns (...)? ...:... expressions on ? and : |alignmap-a?| - \a< : aligns << and >> for c++ |alignmap-a<| - \a= : aligns := assignments |alignmap-a=| - \abox : draw a C-style comment box around text lines |alignmap-abox| - \acom : useful for aligning comments |alignmap-acom| - \adcom: useful for aligning comments in declarations |alignmap-adcom| - \anum : useful for aligning numbers |alignmap-anum| - NOTE: For the visual-mode use of \anum, <vis.vim> is needed! - See http://mysite.verizon.net/astronaut/vim/index.html#VIS - \aenum: align a European-style number |alignmap-anum| - \aunum: align a USA-style number |alignmap-anum| - \adec : useful for aligning declarations |alignmap-adec| - \adef : useful for aligning definitions |alignmap-adef| - \afnc : useful for aligning ansi-c style functions' - argument lists |alignmap-afnc| - \adcom: a variant of \acom, restricted to comment |alignmap-adcom| - containing lines only, but also only for - those which don't begin with a comment. - Good for certain declaration styles. - \aocom: a variant of \acom, restricted to comment |alignmap-aocom| - containing lines only - \tab : align a table based on tabs *alignmap-tab* - (converts to spaces) - \tml : useful for aligning the trailing backslashes |alignmap-tml| - used to continue lines (shell programming, etc) - \tsp : use Align to make a table separated by blanks |alignmap-tsp| - (left justified) - \ts, : like \t, but swaps whitespace on the right of *alignmap-ts,* - the commas to their left - \ts: : like \t: but swaps whitespace on the right of *alignmap-ts:* - the colons to their left - \ts< : like \t< but swaps whitespace on the right of *alignmap-ts<* - the less-than signs to their left - \ts= : like \t= but swaps whitespace on the right of *alignmap-ts=* - the equals signs to their left - \Tsp : use Align to make a table separated by blanks |alignmap-Tsp| - (right justified) - \tsq : use Align to make a table separated by blanks |alignmap-tsq| - (left justified) -- "strings" are not split up - \tt : useful for aligning LaTeX tabular tables |alignmap-tt| - \Htd : tabularizes html tables: |alignmap-Htd| - <TR><TD> ...field... </TD><TD> ...field... </TD></TR> - - *alignmap-t|* *alignmap-t#* *alignmap-t,* *alignmap-t:* - *alignmap-t;* *alignmap-t<* *alignmap-t?* *alignmap-t~* - *alignmap-m=* - \tx : make a left-justified alignment on - character "x" where "x" is: ,:<=@|# |alignmap-t=| - \Tx : make a right-justified alignment on - character "x" where "x" is: ,:<=@# |alignmap-T=| - \m= : like \t= but aligns with %... style comments - - The leading backslash is actually <leader> (see |mapleader| for how to - customize the leader to be whatever you like). These maps use the - <Align.vim> package and are defined in the <AlignMaps.vim> file. - Although the maps use AlignCtrl options, they typically use the "m" - option which pushes the options (AlignPush). The associated Align - call which follows will then AlignPop the user's original options - back. - - ALIGNMENT MAP USE WITH MARK AND MOVE~ - In the examples below, one may select the text with a "ma" at the - first line, move to the last line, then execute the map. - - ALIGNMENT MAP USE WITH VISUAL MODE~ - Alternatively, one may select the text with the "V" visual mode - command. - - ALIGNMENT MAP USE WITH MENUS~ - One may use the mark-and-move style (ma, move, use the menu) or - the visual mode style (use the V visual mode, move, then select - the alignment map with menu selection). The alignment map menu - items are under DrChip.AlignMaps . - - One may even change the top level menu name to whatever is wished; by - default, its > - let g:DrChipTopLvlMenu= "DrChip." -< If you set the variable to the empty string (""), then no menu items - will be produced. Of course, one must have a vim with +menu, the gui - must be running, and |'go'| must have the menu bar suboption (ie. m - must be included). - - COMPLEX ALIGNMENT MAP METHOD~ - - For those complex alignment maps which do alignment on constructs - (e.g. \acom, \adec, etc), a series of substitutes is used to insert - "@" symbols in appropriate locations. Align#Align() is then used to - do alignment directly on "@"s; then it is followed by further - substitutes to do clean-up. However, the maps \WS and \WE, used by - every map supported by AlignMaps, protect any original embedded "@" - symbols by first converting them to <DEL> characters, doing the - requested job, and then converting them back. > - - \WS calls AlignMaps#WrapperStart() - \WE calls AlignMaps#WrapperEnd() -< - - --------------------------- - Alignment Map Examples: \a, *alignmap-a,* {{{3 - --------------------------- - - Original: illustrates comma-separated declaration splitting: > - int a,b,c; - struct ABC_str abc,def; -< - Becomes: > - int a; - int b; - int c; - struct ABC_str abc; - struct ABC_str def; -< - - --------------------------- - Alignment Map Examples: \a? *alignmap-a?* {{{3 - --------------------------- - - Original: illustrates ()?: aligning > - printf("<%s>\n", - (x == ABC)? "abc" : - (x == DEFG)? "defg" : - (x == HIJKL)? "hijkl" : "???"); -< - Becomes: select "(x == ..." lines, then \a? > - printf("<%s>\n", - (x == ABC)? "abc" : - (x == DEFG)? "defg" : - (x == HIJKL)? "hijkl" : "???"); -< - - --------------------------- - Alignment Map Examples: \a< *alignmap-a<* {{{3 - --------------------------- - - Original: illustrating aligning of << and >> > - cin << x; - cin << y; - cout << "this is x=" << x; - cout << "but y=" << y << "is not"; -< - Becomes: select "(x == ..." lines, then \a< > - cin << x; - cin << y; - cout << "this is x=" << x; - cout << "but y=" << y << "is not"; -< - - --------------------------- - Alignment Map Examples: \a= *alignmap-a=* {{{3 - --------------------------- - - Original: illustrates how to align := assignments > - aa:=bb:=cc:=1; - a:=b:=c:=1; - aaa:=bbb:=ccc:=1; -< - Bcomes: select the three assignment lines, then \a:= > - aa := bb := cc := 1; - a := b := c := 1; - aaa := bbb := ccc := 1; -< - - --------------------------- - Alignment Map Examples: \abox *alignmap-abox* {{{3 - --------------------------- - - Original: illustrates how to comment-box some text > - This is some plain text - which will - soon be surrounded by a - comment box. -< - Becomes: Select "This..box." with ctrl-v, press \abox > - /*************************** - * This is some plain text * - * which will * - * soon be surrounded by a * - * comment box. * - ***************************/ -< - - --------------------------- - Alignment Map Examples: \acom *alignmap-acom* {{{3 - --------------------------- - - Original: illustrates aligning C-style comments (works for //, too) > - if(itworks) { /* this */ - then= dothis; /* is a */ - } /* set of three comments */ -< - Becomes: Select the three lines, press \acom > - if(itworks) { /* this */ - then= dothis; /* is a */ - } /* set of three comments */ -< - Also see |alignmap-aocom| - - - --------------------------- - Alignment Map Examples: \anum *alignmap-anum* {{{3 - --------------------------- - - Original: illustrates how to get numbers lined up > - -1.234 .5678 -.901e-4 - 1.234 5.678 9.01e-4 - 12.34 56.78 90.1e-4 - 123.4 567.8 901.e-4 -< - Becomes: Go to first line, ma. Go to last line, press \anum > - -1.234 .5678 -.901e-4 - 1.234 5.678 9.01e-4 - 12.34 56.78 90.1e-4 - 123.4 567.8 901.e-4 -< - Original: > - | -1.234 .5678 -.901e-4 | - | 1.234 5.678 9.01e-4 | - | 12.34 56.78 90.1e-4 | - | 123.4 567.8 901.e-4 | -< - Becomes: Select the numbers with ctrl-v (visual-block mode), > - press \anum - | -1.234 .5678 -.901e-4 | - | 1.234 5.678 9.01e-4 | - | 12.34 56.78 90.1e-4 | - | 123.4 567.8 901.e-4 | -< - Original: > - -1,234 ,5678 -,901e-4 - 1,234 5,678 9,01e-4 - 12,34 56,78 90,1e-4 - 123,4 567,8 901,e-4 -< - Becomes: Go to first line, ma. Go to last line, press \anum > - -1,234 ,5678 -,901e-4 - 1,234 5,678 9,01e-4 - 12,34 56,78 90,1e-4 - 123,4 567,8 901,e-4 -< - In addition: - \aenum is provided to support European-style numbers - \aunum is provided to support USA-style numbers - - One may get \aenum behavior for \anum > - let g:alignmaps_euronumber= 1 -< or \aunum behavior for \anum if one puts > - let g:alignmaps_usanumber= 1 -< in one's <.vimrc>. - - - --------------------------- - Alignment Map Examples: \ascom *alignmap-ascom* {{{3 - --------------------------- - - Original: > - /* A Title */ - int x; /* this is a comment */ - int yzw; /* this is another comment*/ -< - Becomes: Select the three lines, press \ascom > - /* A Title */ - int x; /* this is a comment */ - int yzw; /* this is another comment */ -< - - --------------------------- - Alignment Map Examples: \adec *alignmap-adec* {{{3 - --------------------------- - - Original: illustrates how to clean up C/C++ declarations > - int a; - float b; - double *c=NULL; - char x[5]; - struct abc_str abc; - struct abc_str *pabc; - int a; /* a */ - float b; /* b */ - double *c=NULL; /* b */ - char x[5]; /* x[5] */ - struct abc_str abc; /* abc */ - struct abc_str *pabc; /* pabc */ - static int a; /* a */ - static float b; /* b */ - static double *c=NULL; /* b */ - static char x[5]; /* x[5] */ - static struct abc_str abc; /* abc */ - static struct abc_str *pabc; /* pabc */ -< - Becomes: Select the declarations text, then \adec > - int a; - float b; - double *c = NULL; - char x[5]; - struct abc_str abc; - struct abc_str *pabc; - int a; /* a */ - float b; /* b */ - double *c = NULL; /* b */ - char x[5]; /* x[5] */ - struct abc_str abc; /* abc */ - struct abc_str *pabc; /* pabc */ - static int a; /* a */ - static float b; /* b */ - static double *c = NULL; /* b */ - static char x[5]; /* x[5] */ - static struct abc_str abc; /* abc */ - static struct abc_str *pabc; /* pabc */ -< - - --------------------------- - Alignment Map Examples: \adef *alignmap-adef* {{{3 - --------------------------- - - Original: illustrates how to line up #def'initions > - #define ONE 1 - #define TWO 22 - #define THREE 333 - #define FOUR 4444 -< - Becomes: Select four definition lines, apply \adef > - # define ONE 1 - # define TWO 22 - # define THREE 333 - # define FOUR 4444 -< - - --------------------------- - Alignment Map Examples: \afnc *alignmap-afnc* {{{3 - --------------------------- - - This map is an exception to the usual selection rules. - It uses "]]" to find the function body's leading "{". - Just put the cursor anywhere in the function arguments and - the entire function declaration should be processed. - - Because "]]" looks for that "{" in the first column, the - "original" and "becomes" examples are in the first column, - too. - - Original: illustrates lining up ansi-c style function definitions > - int f( - struct abc_str ***a, /* one */ - long *b, /* two */ - int c) /* three */ - { - } -< - Becomes: put cursor anywhere before the '{', press \afnc > - int f( - struct abc_str ***a, /* one */ - long *b, /* two */ - int c) /* three */ - { - } -< - - --------------------------- - Alignment Map Examples: \adcom *alignmap-adcom* {{{3 - --------------------------- - - Original: illustrates aligning comments that don't begin - lines (optionally after some whitespace). > - struct { - /* this is a test */ - int x; /* of how */ - double y; /* to use adcom */ - }; -< - Becomes: Select the inside lines of the structure, - then press \adcom. The comment-only - line is ignored but the other two comments - get aligned. > - struct { - /* this is a test */ - int x; /* of how */ - double y; /* to use adcom */ - }; -< - - --------------------------- - Alignment Map Examples: \aocom *alignmap-aocom* {{{3 - --------------------------- - - Original: illustrates how to align C-style comments (works for //, too) - but restricted only to aligning with those lines containing - comments. See the difference from \acom (|alignmap-acom|). > - if(itworks) { /* this comment */ - then= dothis; - } /* only appears on two lines */ -< - Becomes: Select the three lines, press \aocom > - if(itworks) { /* this comment */ - then= dothis; - } /* only appears on two lines */ -< - Also see |alignmap-acom| - - - --------------------------- *alignmap-Tsp* - Alignment Map Examples: \tsp *alignmap-tsp* {{{3 - --------------------------- - - Normally Align can't use white spaces for field separators as such - characters are ignored surrounding field separators. The \tsp and - \Tsp maps get around this limitation. - - Original: > - one two three four five - six seven eight nine ten - eleven twelve thirteen fourteen fifteen -< - Becomes: Select the lines, \tsp > - one two three four five - six seven eight nine ten - eleven twelve thirteen fourteen fifteen -< - Becomes: Select the lines, \Tsp > - one two three four five - six seven eight nine ten - eleven twelve thirteen fourteen fifteen -< - - --------------------------- - Alignment Map Examples: \tsq *alignmap-tsq* {{{3 - --------------------------- - - The \tsp map is useful for aligning tables based on white space, - but sometimes one wants double-quoted strings to act as a single - object in spite of embedded spaces. The \tsq map was invented - to support this. (thanks to Leif Wickland) - - Original: > - "one two" three - four "five six" -< - Becomes: Select the lines, \tsq > - "one two" three - four "five six" -< - - --------------------------- - Alignment Map Examples: \tt *alignmap-tt* {{{3 - --------------------------- - - Original: illustrates aligning a LaTex Table > - \begin{tabular}{||c|l|r||} - \hline\hline - one&two&three\\ \hline - four&five&six\\ - seven&eight&nine\\ - \hline\hline - \end{tabular} -< - Becomes: Select the three lines inside the table > - (ie. one..,four..,seven..) and press \tt - \begin{tabular}{||c|l|r||} - \hline\hline - one & two & three \\ \hline - four & five & six \\ - seven & eight & nine \\ - \hline\hline - \end{tabular} -< - - ---------------------------- - Alignment Map Examples: \tml *alignmap-tml* {{{3 - ---------------------------- - - Original: illustrates aligning multi-line continuation marks > - one \ - two three \ - four five six \ - seven \\ \ - eight \nine \ - ten \ -< - Becomes: > - one \ - two three \ - four five six \ - seven \\ \ - eight \nine \ - ten \ -< - - --------------------------- - Alignment Map Examples: \t= *alignmap-t=* {{{3 - --------------------------- - - Original: illustrates left-justified aligning of = > - aa=bb=cc=1;/*one*/ - a=b=c=1;/*two*/ - aaa=bbb=ccc=1;/*three*/ -< - Becomes: Select the three equations, press \t= > - aa = bb = cc = 1; /* one */ - a = b = c = 1; /* two */ - aaa = bbb = ccc = 1; /* three */ -< - - --------------------------- - Alignment Map Examples: \T= *alignmap-T=* {{{3 - --------------------------- - - Original: illustrates right-justified aligning of = > - aa=bb=cc=1; /* one */ - a=b=c=1; /* two */ - aaa=bbb=ccc=1; /* three */ -< - Becomes: Select the three equations, press \T= > - aa = bb = cc = 1; /* one */ - a = b = c = 1; /* two */ - aaa = bbb = ccc = 1; /* three */ -< - - --------------------------- - Alignment Map Examples: \Htd *alignmap-Htd* {{{3 - --------------------------- - - Original: for aligning tables with html > - <TR><TD>...field one...</TD><TD>...field two...</TD></TR> - <TR><TD>...field three...</TD><TD>...field four...</TD></TR> -< - Becomes: Select <TR>... lines, press \Htd > - <TR><TD> ...field one... </TD><TD> ...field two... </TD></TR> - <TR><TD> ...field three... </TD><TD> ...field four... </TD></TR> -< -============================================================================== -4. Alignment Tools' History *align-history* {{{1 - -ALIGN HISTORY {{{2 - 35 : Nov 02, 2008 * g:loaded_AlignPlugin testing to prevent re-loading - installed - Nov 19, 2008 * new sanity check for an AlignStyle of just ":" - Jan 08, 2009 * save&restore of |'mod'| now done with local - variant - 34 : Jul 08, 2008 * using :AlignCtrl before entering any alignment - control commands was causing an error. - 33 : Sep 20, 2007 * s:Strlen() introduced to support various ways - used to represent characters and their effects - on string lengths. See |align-strlen|. - * Align now accepts "..." -- so it can accept - whitespace as separators. - 32 : Aug 18, 2007 * uses |<q-args>| instead of |<f-args>| plus a - custom argument splitter to allow patterns with - backslashes to slide in unaltered. - 31 : Aug 06, 2007 * :[range]Align! [AlignCtrl settings] pattern(s) - implemented. - 30 : Feb 12, 2007 * now uses |setline()| - 29 : Jan 18, 2006 * cecutil updated to use keepjumps - Feb 23, 2006 * Align now converted to vim 7.0 style using - auto-loading functions. - 28 : Aug 17, 2005 * report option workaround - Oct 24, 2005 * AlignCtrl l: wasn't behaving as expected; fixed - 27 : Apr 15, 2005 : cpo workaround - ignorecase workaround - 26 : Aug 20, 2004 : loaded_align now also indicates version number - GetLatestVimScripts :AutoInstall: now supported - 25 : Jul 27, 2004 : For debugging, uses Dfunc(), Dret(), and Decho() - 24 : Mar 03, 2004 : (should've done this earlier!) visualmode(1) - not supported until v6.2, now Align will avoid - calling it for earlier versions. Visualmode - clearing won't take place then, of course. - 23 : Oct 07, 2003 : Included Leif Wickland's ReplaceQuotedSpaces() - function which supports \tsq - 22 : Jan 29, 2003 : Now requires 6.1.308 or later to clear visualmode() - 21 : Jan 10, 2003 : BugFix: similar problem to #19; new code - bypasses "norm! v\<Esc>" until initialization - is over. - 20 : Dec 30, 2002 : BugFix: more on "unable to highlight" fixed - 19 : Nov 21, 2002 : BugFix: some terminals gave an "unable to highlight" - message at startup; Hari Krishna Dara tracked it - down; a silent! now included to prevent noise. - 18 : Nov 04, 2002 : BugFix: re-enabled anti-repeated-loading - 17 : Nov 04, 2002 : BugFix: forgot to have AlignPush() push s:AlignSep - AlignCtrl now clears visual-block mode when used so - that Align won't try to use old visual-block - selection marks '< '> - 16 : Sep 18, 2002 : AlignCtrl <>| options implemented (separator - justification) - 15 : Aug 22, 2002 : bug fix: AlignCtrl's ":" now acts as a modifier of - the preceding alignment operator (lrc) - 14 : Aug 20, 2002 : bug fix: AlignCtrl default now keeps &ic unchanged - bug fix: Align, on end-field, wasn't using correct - alignop bug fix: Align, on end-field, was appending - padding - 13 : Aug 19, 2002 : bug fix: zero-length g/v patterns are accepted - bug fix: always skip blank lines - bug fix: AlignCtrl default now also clears g and v - patterns - 12 : Aug 16, 2002 : moved keep_ic above zero-length pattern checks - added "AlignCtrl default" - fixed bug with last field getting separator spaces - at end line - 11 : Jul 08, 2002 : prevent separator patterns which match zero length - -+: included as additional alignment/justification - styles - 10 : Jun 26, 2002 : =~# used instead of =~ (for matching case) - ignorecase option handled - 9 : Jun 25, 2002 : implemented cyclic padding - -ALIGNMENT MAP HISTORY *alignmap-history* {{{2 - v41 Nov 02, 2008 * g:loaded_AlignMapsPlugin testing to prevent - re-loading installed - * AlignMaps now use 0x0f (ctrl-p) for special - character substitutions (instead of 0xff). - Seems to avoid some problems with having to - use Strlen(). - * bug fixed with \ts, - * new maps: \ts; \ts, \ts: \ts< \ts= \a( - v40 Oct 21, 2008 * Modified AlignMaps so that its maps use <Plug>s - and <script>s. \t@ and related maps have been - changed to call StdAlign() instead. The - WrapperStart function now takes an argument and - handles being called via visual mode. The - former nmaps and vmaps have thus been replaced - with a simple map. - Oct 24, 2008 * broke AlignMaps into a plugin and autoload - pair of scripts. - v39 Mar 06, 2008 : * \t= only does /* ... */ aligning when in *.c - *.cpp files. - v38 Aug 18, 2007 : * \tt altered so that it works with the new - use of |<q-args>| plus a custom argument - splitter - v36 Sep 27, 2006 : * AlignWrapperStart() now has tests that marks - y and z are not set - May 15, 2007 * \anum and variants improved - v35 Sep 01, 2006 : * \t= and cousins used "`"s. They now use \xff - characters. - * \acom now works with doxygen style /// comments - * <char-0xff> used in \t= \T= \w= and \m= instead - of backquotes. - v34 Feb 23, 2006 : * AlignMaps now converted to vim 7.0 style using - auto-loading functions. - v33 Oct 12, 2005 : * \ts, now uses P1 in its AlignCtrl call - v32 Jun 28, 2005 : * s:WrapperStart() changed to AlignWrapperStart() - s:WrapperEnd() changed to AlignWrapperEnd() - These changes let the AlignWrapper...()s to be - used outside of AlignMaps.vim - v31 Feb 01, 2005 : * \adcom included, with help - * \a, now works across multiple lines with - different types - * AlignMaps now uses <cecutil.vim> for its mark and - window-position saving and restoration - Mar 04, 2005 * improved \a, - Apr 06, 2005 * included \aenum, \aunum, and provided - g:alignmaps_{usa|euro]number} options - v30 Aug 20, 2004 : * \a, : handles embedded assignments and does \adec - * \acom now can handle Doxygen-style comments - * g:loaded_alignmaps now also indicates version - * internal maps \WE and \WS are now re-entrant - v29 Jul 27, 2004 : * \tml aligns trailing multi-line single - backslashes (thanks to Raul Benavente!) - v28 May 13, 2004 : * \a, had problems with leading blanks; fixed! - v27 Mar 31, 2004 : * \T= was having problems with == and != - * Fixed more problems with \adec - v26 Dec 09, 2003 : * \ascom now also ignores lines without comments - * \tt \& now not matched - * \a< handles both << and >> - v25 Nov 14, 2003 : * included \anum (aligns numbers with periods and - commas). \anum also supported with ctrl-v mode. - * \ts, \Ts, : (aligns on commas, then swaps leading - spaces with commas) - * \adec ignores preprocessor lines and lines with - with comments-only - v23 Sep 10, 2003 : * Bugfix for \afnc - no longer overwrites marks y,z - * fixed bug in \tsp, \tab, \Tsp, and \Tab - lines - containing backslashes were having their - backslashes removed. Included Leif Wickland's - patch for \tsq. - * \adef now ignores lines holding comments only - v18 Aug 22, 2003 : \a< lines up C++'s << operators - saves/restores gdefault option (sets to nogd) - all b:..varname.. are now b:alignmaps_..varname.. - v17 Nov 04, 2002 : \afnc now handles // comments correctly and - commas within comments - v16 Sep 10, 2002 : changed : to :silent! for \adec - v15 Aug 27, 2002 : removed some <c-v>s - v14 Aug 20, 2002 : \WS, \WE mostly moved to functions, marks y and z - now restored - v11 Jul 08, 2002 : \abox bug fix - v9 Jun 25, 2002 : \abox now handles leading initial whitespace - : various bugfixes to \afnc, \T=, etc - -============================================================================== -Modelines: {{{1 -vim:tw=78:ts=8:ft=help:fdm=marker: |