+++ /dev/null
-/***************************************************************************/
-/* */
-/* ftmoderr.h */
-/* */
-/* FreeType module error offsets (specification). */
-/* */
-/* Copyright 2001-2005, 2010, 2013 by */
-/* David Turner, Robert Wilhelm, and Werner Lemberg. */
-/* */
-/* This file is part of the FreeType project, and may only be used, */
-/* modified, and distributed under the terms of the FreeType project */
-/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
-/* this file you indicate that you have read the license and */
-/* understand and accept it fully. */
-/* */
-/***************************************************************************/
-
-
- /*************************************************************************/
- /* */
- /* This file is used to define the FreeType module error codes. */
- /* */
- /* If the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in `ftoption.h' is */
- /* set, the lower byte of an error value identifies the error code as */
- /* usual. In addition, the higher byte identifies the module. For */
- /* example, the error `FT_Err_Invalid_File_Format' has value 0x0003, the */
- /* error `TT_Err_Invalid_File_Format' has value 0x1303, the error */
- /* `T1_Err_Invalid_File_Format' has value 0x1403, etc. */
- /* */
- /* Note that `FT_Err_Ok', `TT_Err_Ok', etc. are always equal to zero, */
- /* including the high byte. */
- /* */
- /* If FT_CONFIG_OPTION_USE_MODULE_ERRORS isn't set, the higher byte of */
- /* an error value is set to zero. */
- /* */
- /* To hide the various `XXX_Err_' prefixes in the source code, FreeType */
- /* provides some macros in `fttypes.h'. */
- /* */
- /* FT_ERR( err ) */
- /* Add current error module prefix (as defined with the */
- /* `FT_ERR_PREFIX' macro) to `err'. For example, in the BDF module */
- /* the line */
- /* */
- /* error = FT_ERR( Invalid_Outline ); */
- /* */
- /* expands to */
- /* */
- /* error = BDF_Err_Invalid_Outline; */
- /* */
- /* For simplicity, you can always use `FT_Err_Ok' directly instead */
- /* of `FT_ERR( Ok )'. */
- /* */
- /* FT_ERR_EQ( errcode, err ) */
- /* FT_ERR_NEQ( errcode, err ) */
- /* Compare error code `errcode' with the error `err' for equality */
- /* and inequality, respectively. Example: */
- /* */
- /* if ( FT_ERR_EQ( error, Invalid_Outline ) ) */
- /* ... */
- /* */
- /* Using this macro you don't have to think about error prefixes. */
- /* Of course, if module errors are not active, the above example is */
- /* the same as */
- /* */
- /* if ( error == FT_Err_Invalid_Outline ) */
- /* ... */
- /* */
- /* FT_ERROR_BASE( errcode ) */
- /* FT_ERROR_MODULE( errcode ) */
- /* Get base error and module error code, respectively. */
- /* */
- /* */
- /* It can also be used to create a module error message table easily */
- /* with something like */
- /* */
- /* { */
- /* #undef __FTMODERR_H__ */
- /* #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, */
- /* #define FT_MODERR_START_LIST { */
- /* #define FT_MODERR_END_LIST { 0, 0 } }; */
- /* */
- /* const struct */
- /* { */
- /* int mod_err_offset; */
- /* const char* mod_err_msg */
- /* } ft_mod_errors[] = */
- /* */
- /* #include FT_MODULE_ERRORS_H */
- /* } */
- /* */
- /*************************************************************************/
-
-
-#ifndef __FTMODERR_H__
-#define __FTMODERR_H__
-
-
- /*******************************************************************/
- /*******************************************************************/
- /***** *****/
- /***** SETUP MACROS *****/
- /***** *****/
- /*******************************************************************/
- /*******************************************************************/
-
-
-#undef FT_NEED_EXTERN_C
-
-#ifndef FT_MODERRDEF
-
-#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
-#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v,
-#else
-#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0,
-#endif
-
-#define FT_MODERR_START_LIST enum {
-#define FT_MODERR_END_LIST FT_Mod_Err_Max };
-
-#ifdef __cplusplus
-#define FT_NEED_EXTERN_C
- extern "C" {
-#endif
-
-#endif /* !FT_MODERRDEF */
-
-
- /*******************************************************************/
- /*******************************************************************/
- /***** *****/
- /***** LIST MODULE ERROR BASES *****/
- /***** *****/
- /*******************************************************************/
- /*******************************************************************/
-
-
-#ifdef FT_MODERR_START_LIST
- FT_MODERR_START_LIST
-#endif
-
-
- FT_MODERRDEF( Base, 0x000, "base module" )
- FT_MODERRDEF( Autofit, 0x100, "autofitter module" )
- FT_MODERRDEF( BDF, 0x200, "BDF module" )
- FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" )
- FT_MODERRDEF( Cache, 0x400, "cache module" )
- FT_MODERRDEF( CFF, 0x500, "CFF module" )
- FT_MODERRDEF( CID, 0x600, "CID module" )
- FT_MODERRDEF( Gzip, 0x700, "Gzip module" )
- FT_MODERRDEF( LZW, 0x800, "LZW module" )
- FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" )
- FT_MODERRDEF( PCF, 0xA00, "PCF module" )
- FT_MODERRDEF( PFR, 0xB00, "PFR module" )
- FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" )
- FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" )
- FT_MODERRDEF( PSnames, 0xE00, "PS names module" )
- FT_MODERRDEF( Raster, 0xF00, "raster module" )
- FT_MODERRDEF( SFNT, 0x1000, "SFNT module" )
- FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" )
- FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
- FT_MODERRDEF( Type1, 0x1300, "Type 1 module" )
- FT_MODERRDEF( Type42, 0x1400, "Type 42 module" )
- FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
- FT_MODERRDEF( GXvalid, 0x1600, "GX validation module" )
-
-
-#ifdef FT_MODERR_END_LIST
- FT_MODERR_END_LIST
-#endif
-
-
- /*******************************************************************/
- /*******************************************************************/
- /***** *****/
- /***** CLEANUP *****/
- /***** *****/
- /*******************************************************************/
- /*******************************************************************/
-
-
-#ifdef FT_NEED_EXTERN_C
- }
-#endif
-
-#undef FT_MODERR_START_LIST
-#undef FT_MODERR_END_LIST
-#undef FT_MODERRDEF
-#undef FT_NEED_EXTERN_C
-
-
-#endif /* __FTMODERR_H__ */
-
-
-/* END */
git.r.bdr.sh / rbdr / super-polarity / blobdiff